Understanding Piezoelectric Crystal Filled Glass Hand-Cylind

Crystal filled glass hand-cylinder operation theory: “The Crystal Generators are a new technology that is currently very popular with users of frequency generators, Rife Machines, and many electro-therapy devices. The idea is that when the energy [energy = the electromagnetic frequency] from the frequency generator is transmitted into the conductive saline/silver solution, the electromagnetic energy [frequency] reacts with all of the different crystals and minerals in the Crystal Generators. That pulse of electromagnetic energy [frequency] reacting with the crystals and minerals causes a release of beneficial frequency energy-rich in harmonics. These special frequencies are extremely rich in harmonics due to the fact that every different crystal, mineral, or stone in the Crystal Generators creates its own unique harmonic frequencies when energized.

The charge distribution matrix within the quartz crystals and minerals is symmetric and the net electrical potential is zero. The quartz crystals and minerals, when activated by a frequency generator, delivers no electrical charge, but instead, delivers a sound wave compatible with the wellness needs of the cells. There is neither an electric field nor a magnetic field associated with sound or ultrasound oscillations, vibrations, or waves. This delivery system allows all cells to receive signals that activate their own blueprint frequencies.

Crystals, as natural piezo-electric oscillators, convert Frequency Generator frequencies into multiple sound signals that cause sympathetic blueprint resonance. Crystal Generators provide an expanded frequency delivery system to cells of the research subject. The body evidently knows how to heal itself, and when given the appropriate blueprint frequencies, these regenerative patterns serve both as a pacemaker and a cellular reminder of the original blueprint frequency response.” These kinds of harmonic frequencies are unavailable in any other frequency generator's mode of operational output and are unique to the Crystal Generators. As the subject holds the Crystal Generators in their hands and runs their program of choice on their frequency generator, the spectrum of rich harmonic frequencies is transmitted and delivered to the energy field of the body with beneficially valuable and health-enhancing results."

These Crystal filled hand-cylinders are not a "new technology" and have been around for almost 20 years. They mention that quartz crystals are "piezoelectric oscillators" and that they use these types of crystals in their Crystal filled glass hand-cylinders. Crystal oscillators have been used in electronics for many years. Below is a photo of many different style crystal oscillators. The crystals are within the metal enclosures so they can be used in different electronic designs. Notice that all of these crystal oscillators have at least two electrical connections so alternating (AC) or Direct (DC) current can be put into them to produce the desired frequency output.

 If the square wave frequency was actually going into the crystals, as claimed, the oscilloscope in our video should have shown a sine wave coming out, but it only showed a square wave. This shows that no frequency is going into the crystals or coming out of them because of the design flaws. What is really happening is the frequency is only going into the "conductive saline/silver solution", and coming through the glass at a very low power level of 1.5 volts instead of 60 volts. As mentioned before the glass is both an insulator and a dielectric and it is the insulating properties of the glass that causes the enormous power loss which will keep a person from getting any real benefit when using the “Conduction” or contact method with any type of glass conductor.

Here is the last claim about the Crystal filled hand-cylinders that needs to be discussed. We quote:

"The Crystal Generators, it is reported, will provide an overall increase of 200% greater immune building, and a 300 to 400% health and wellness boost beyond the capabilities of the steel electrodes. They may effectively be applied in either the "Direct" or "Broadcast Mode."

You may have noticed they claim, but give no scientific proof other than "it is reported," for this 200% to 400% health and wellness superiority above metal hand-cylinders. They also claim that these Crystal filled glass hand-cylinders can broadcast frequencies just like a plasma tube or a properly tuned metal antenna. But when we measured them the only way any frequency could be read was by direct contact with the glass. If they really did broadcast any frequency no contact with the glass would have been necessary. This fact eliminates their incorrect "Broadcast Mode" claim.

 Since the frequency output from a frequency generator is the only frequency that is being put into the Crystal filled glass hand-cylinders with no ultrasound frequencies coming out, except those that are put into them, then their claim is not correct. Also, the voltage that was measured dropped from 60 volts down to 1.5 volts which is a 97.5% power drop and this should make anyone wonder how they can claim to have an "overall increase of 200% greater immune building, and a 300 to 400% health and wellness superiority capabilities above metal hand-cylinders." It appears these claims are only sales-hype based on no real scientific proof. The tests and science do not support their claims. All of these tests and the power levels measured clearly show that these Crystal filled glass hand-cylinders cannot produce ultrasound frequencies or broadcast frequencies like a plasma tube or deliver the full power output from a frequency generator.

In order to fix the design flaws, the crystals would have to be removed from the glass cylinders out of the "conductive saline/silver solution" which keeps them in a permanently neutral state. Doing this would also keep the crystals from shorting between the positive and negative sides of the crystals if physical pressure was applied to produce electricity. Then all of the crystals would need to be cut on the correct angle and have two metal plates attached with wires so that each crystal had a positive and negative connection like an ultrasound transducer does. Each crystal would also have to be sealed so there wouldn’t be any electrical short. Even if you did this and you again put the crystals back into the glass cylinders with the "conductive saline/silver solution" you would still lose about 97.5% of the power output because glass is an insulator. It is for all of these reasons their design flaws can never be fixed unless the glass cylinders and the "conductive saline/silver solution" are removed from the design. Then, of course, you no longer have Crystal filled glass hand-cylinders. 

In chapter 18 of the "Rife Machine Report" we discussed how "conduction" and "induction" works including how metal is a superior conductor of electricity (frequencies) than glass through direct contact. If you have not read chapter 18 we suggest you read that information in order to better understand this chapter. Of these two different methods, the videos you have watched show metal is a superior conductor of electrical voltage and current than glass when it comes to direct contact. You never hear that someone was electrocuted by touching glass.

It is important to understand that every frequency that Dr. Rife used was measurable and readable with an oscilloscope. His frequencies covered from the audio range to about the 18 million Hertz or 18 Megahertz range and are always readable with electronic test equipment. All ultrasound frequencies are also readable. The reason it is important to understand that all of Dr. Rife's frequencies were measurable and readable, including ultrasound, is that there are some people who make these crystal filled hand-cylinders that claim they are using a superior method of delivering frequencies, which is neither measurable nor readable. This would be like purchasing a frequency generator and then taking it to an electronics company for testing only to find out that the frequency generator is not outputting any frequencies. But when the manufacturer is contacted they claim their frequency generator is working, but on a superior method which is not readable or measurable. Anyone would know, at that very moment, the company which sold them the frequency generator was dishonest.

The reader should also understand that all frequencies have an electromagnetic field even though the manufacturers of the Crystal filled hand-cylinders incorrectly claim "there is neither an electric field nor a magnetic field associated with sound or ultrasound oscillations, vibrations, or waves" output from their "Crystal filled hand-cylinders." They call them Crystal Generators but we have shown they do not actually generate or produce any frequencies because of the design flaws made in their construction. It is actually the frequency generator they are connected to that produces the frequency or frequencies they output. This is why they are not really Crystal Generators.

 They say a picture is worth a thousand words. Power measurement videos were made so the reader can see real power tests comparisons of Metal Hand-Cylinders to Crystal Filled Glass Hand-Cylinders. This first video demonstrates that metal conductors, such as Metal hand-cylinders, are almost 100% efficient. In the two photos above are Watt Meters. The one on the left is the MFJ-849 digital readout Watt Meter and the other on the right is the MFJ-872 needle style Watt Meter. The digital readout watt meter will be used to measure the RF or Radio Frequency power output level from the frequency generator and then the power level will be measured on the surface of the metal hand-cylinders. You will notice that the power level only drops from 5.16-watts to 4.94-watts. The "FWD" or Forward reading represents the power output in Watts with all Watt Meters. Click on the photo below to watch the Watt Meter Metal Hand-Cylinder power test video. 

 The next video is very revealing. It shows both the "Crystal filled glass hand-cylinders" and the "Metal hand-cylinders" are both connected to the same positive and negative output of the frequency generator. The power output is measured using the MFJ 849 digital readout Watt Meter which can read power levels as low as 0.05-watts or 1/20th of 1-watt. If the power levels are less than 0.05-watts the meter will read 0 (zero watts) output. With this understanding, the power output is first measured on the surface of the "Metal hand-cylinders" which reads a 4.72-watts output. Then the power output is measured on the glass surface of the "Crystal fill glass hand-cylinders" which reads 0-watts output. This 0-watts output reading is because the power output level is less than 0.05-watts on the surface of the glass because glass is both an insulator and a dielectric. Most people use wet cloth covers when using "Metal hand-cylinders" for higher conductivity. These wet cloth covers were put onto the "Crystal fill glass hand-cylinders" in order to increase the conductivity so the power output level could be read. Since glass is both a dielectric and an insulator it will allow a small amount of electrical current to pass through it and the wet cloth covers will increase the conductivity to a level that is readable by the wattmeter. With this explanation, you will then see we measure the power level touching the wet cloth covers and the power output level is about 0.36-watts or 1/3 of 1-watt. This shows that the power level dropped from 4.7-watts on the surface of the "Metal hand-cylinders" down to 0.36-watts or 1/3 of 1-watt on the surface of the wet "Crystal filled glass hand-cylinders." This means there is a 13 times power level drop between a metal conductor and a glass conductor.

As the video continues, an oscilloscope is used to measure the voltage on the surface of the glass of the "Crystal filled glass hand-cylinders" which only reads about 1.7 volts or a 29.4 times voltage drop from metal to glass. Next, the voltage level is read from the wet cloth covers and it reads about 6 volts. Then the voltage on the surface of the "Metal hand-cylinders" is read at about 50 volts. This is an 8.3 times voltage drop from metal to glass. Both voltage and current determine watts of power and this is the reason we used a wattmeter to measure the power output levels. Since the majority of the people that use these "Crystal filled glass hand-cylinders" never use wet cloth covers they would never receive even 1/3rd of 1-watt of power. The power level they actually receive is probably around 0.05-watts or 1/20 of 1-watt instead of the full 4.7 watts the frequency generator is outputting. With this understanding of what to look for when watching the video click on the photo below to watch this video.

 Since metal is a superior conductor than glass no claims are necessary or needed for "Metal hand-cylinders" because they work 100% on the scientific law of "Conduction." In other words, whatever the voltage, current or watts that are output from a frequency generator will be what is delivered to the person using the "Metal hand-cylinders" from their direct contact when holding them. This is not the case with the Crystal Generators or Crystal filled glass hand-cylinders, and the video tests you watched clearly verify this fact. If "Crystal filled hand-cylinders" were actually 100% efficient and worked as claimed they would be worth using but their design flaws make this impossible. When people come to understand these facts they always choose metal over glass for any direct contact use. The "broadcast mode" should never be used because the user will receive nothing but the “placebo effect.” We realize some people really believe in these so-called “Crystal Generators” but the majority of the people using them get no positive results and this is because of the design flaws that are easily understood. Piezoelectic crystals cannot work using the incorrect design they use with these “Crystal filled glass hand-cylinders.”

Chapter Summary: "Crystal fill glass hand-cylinders", because of their design flaws, do not create any ultrasound frequencies from any frequency put into them. The only frequency they output is the frequency put into them from a frequency generator. The power loss from using glass or plastic cylinders is almost 13 times. The "Metal hand-cylinder" design used by John Crane and John Marsh is a superior design with almost a 100% power transfer capability.